Produktion av metallpulver

Översikt

Metallpulver are fine metal particles used as feedstock for manufacturing techniques like additive manufacturing, metal injection molding, and powder metallurgy pressing and sintering. Producing advanced specialty metal powders with precise control of chemistry, particle size distribution, morphology, and microstructure is critical to properties of finished components.

There are various methods used for large scale production of metal powder production from different alloy systems including:

• Atomisering av gas
• Atomisering av vatten
• Plasmaatomisering
• Electrode induction melting gas atomization
• Process med roterande elektrod
• Karbonylprocess
• Electrolytic process
• Metal reduction processes

Each process results in powders with different characteristics suited to specific applications.

Metoder för produktion av metallpulver

Metallpulver Produktionsmetoder

There are a variety of commercial methods used for producing metallic powders from different alloy systems. The choice of production method depends on factors like:

• Type of alloy material
• Purity requirements
• Desired powder characteristics like particle size, shape, grain structure
• Scale of production in tons per year
• Powder end use application

Here are some of the most common industrial processes for metal powder production:

Gasatomiseringsprocess

In gas atomization process, a stream of molten metal alloy is disintegrated by high pressure jets of gas, usually nitrogen or argon. The metal stream breaks up into fine droplets, which solidify into powder particles.

Gas atomized powders have a spherical shape and smooth surface morphology. Particle size distribution can be controlled by adjusting process parameters. This is a widely used technique for reactive materials like titanium, aluminum, magnesium alloys as well as stainless steels, tool steels and nickel superalloys.

Atomisering av vatten

In water atomization, the molten metal stream is hit by high velocity water jets. The sudden cooling causes an explosion that breaks the metal into fine particles. The powders have irregular shapes and contain higher oxygen content from water contact.

Water atomization is lower cost process used for producing large volumes of stainless steel, alloy steel, iron and copper powders for pressing and sintering type applications.

Plasma Atomization Process

In plasma atomization process, a plasma torch is used to melt the metal alloy before disintegration into fine droplets through gas jets. The ultra-high temperatures enable highly reactive elements like titanium aluminides to be successfully atomized.

The powders have a very spherical shape and narrow size distribution suitable for additive manufacturing methods like laser melting and electron beam melting.

Rotating Electrode Process (REP)

In the rotating electrode process, a cylindrical metallic electrode is spun at high speeds in an evacuated chamber. It is melted using an electric arc and the molten metal droplets flung off through centrifugal forces cool to form powders.

REP powders have a grain structure and morphology ideal for hot extrusion into fine wires and rods for aerospace alloys like tungsten, molybdenum, tantalum.

Electrode Induction Gas Atomization (EIGA)

The EIGA process uses induction heating to melt consumable electrode tips in an inert gas atmosphere. The droplets undergo secondary gas atomization by argon jets into fine spherical powders.

EIGA enables very high purity of reactive nickel superalloys for critical aerospace components through controlled melting and minimizing contamination.

Karbonylprocessen

In the carbonyl process, metal is converted into a volatile carbonyl, which decomposes under controlled conditions to produce uniform, ultrafine metallic particles. This approach is suitable for producing highly pure iron, nickel and cobalt powders.

Other Powder Production Methods

Some other techniques used for specialty metal powder production include:

• Electrolytic Process: Used for producing irregular shaped copper and nickel powders with dendritic morphology by electro-deposition process
• Metal Reduction Processes: Reduction of metal oxides using hydrogen or carbon to produce titanium, zirconium, tungsten, molybdenum powders
• Mekanisk legering: High energy ball milling to synthesize composite and nanostructured alloys

Metallpulver Specifikationer

Critical quality attributes and specifications tested for metal powders depend on production method and end-use application but typically include:

Pulverkemi

• Alloy composition using optical emission or X-ray fluorescence spectroscopy
• Minor alloying elements
• Impurity elements like oxygen, nitrogen, hydrogen
• Loss on ignition testing at high temperature

Fördelning av partikelstorlek

• Volume mean particle size
• Distribution widths like D10, D50, D90

Particle Shape Characterization

• Scanning electron microscopy for morphology
• Shape factors like aspect ratio and form factor

Mikrostruktur

• Phases present using X-ray diffraction
• Grain characteristics from imaging

Egenskaper för pulver

• Skenbar/avtappningsdensitet
• Flow rates through Hall flowmeter funnel tests
• Compressibility levels

Specification requirements for powders vary widely depending on end use in different applications:

Karakteriseringsmetoder

There are several analytical methods used to characterize the properties of metal powders essential to product performance:

Particle Size Analysis

Laser diffraction methods are most widely used to characterize the particle size distribution. This technique passes a laser beam through a dispersed powder sample which scatters light at an angle dependent on particle sizes. Computer analysis of the diffraction pattern provides detailed statistically relevant size distribution data within seconds.

Morphology and Surface Imaging

Scanning electron microscopy (SEM) provides high resolution images of powder particle shape, surface topographies and features at much higher magnification and depth of focus compared to optical microscopy.

SEM imaging is used to study particle rounding, satellite formation, surface smoothness and defects like porosity.

Density and Flow Property Measurement

Standard test methods have been established to quantify bulk behavior using:

• Hall flowmetry funnel to measure powder flow rates through an orifice
• Carney funnel to assess flowability by angle of repose
• Scott volumeter to determine tap density and compressibility

These methods help predict ease of handling, blending, die filling and spreading during component manufacturing.

X-ray Methods for Composition and Crystal Structure

• X-ray fluorescence spectroscopy accurately identifies and quantifies elemental composition of metals
• X-ray diffraction analyzes the atomic arrangements and phases present by diffraction peak patterns

Tillämpningar av metallpulver

Some major end uses of engineering metal powders include:

Additiv tillverkning

Also known as 3D printing techniques like selective laser melting (SLM), direct metal laser sintering (DMLS) and electron beam melting (EBM) to build complex geometries from titanium, aluminum, stainless steel, superalloy, cobalt chrome powders.

Formsprutning av metall (MIM)

Powders like stainless steels, titanium alloys and tool steels are combined with a binder, injection molded then sintered to manufacture small, complex parts at high volumes for lower costs.

Powder Metallurgy Press and Sinter

Compacting and sintering iron, copper and alloy steel powders into high volume components like gears, bushings and magnets.

There are also niche applications in areas like welding, diamond tools, electronics and surface coatings that use specialty metal powders.

Leverantörer och prissättning

Some leading global suppliers of various metal powders are:

Pricing for metal powders varies widely by:

• Alloy material and composition
• Production method used
• Processing to achieve particle characteristics
• Purity levels and degree of contamination
• Purchase volumes – very high volume contracts bring lower pricing

Typical base prices per kilogram are:

Prices go up significantly for highly customized particle size distributions, controlled oxygen and nitrogen levels below 100 ppm, and small lot purchases.

Advantages and Limitations of Powder Metallurgy

Benefits of Powder Metallurgy

• Ability to produce complex geometries not possible through casting or machining
• Near-net-shape manufacturing reduces material waste
• Higher performance metals and alloys can be used
• Consistent porosity structures not possible in ingot metallurgy
• Components can be mass customized

Limitations of Powder Production and Processing

• Capital investment for production and handling equipment is very high
• Increased surface area makes handling pyrophoric reactive powders risky
• Achieving high compaction densities can require high pressures
• Additional process steps compared to casting
• Portability of AM machines due to powder being LO/NO

Here is a quick comparison of powder metallurgy against the conventional casting process:

Vanliga frågor

Q: What is the typical particle size range used in metal 3D printing powders?

A: In powder bed technologies like selective laser melting (SLM) and electron beam melting (EBM), the optimal particle size range is 15-45 microns. Finer powders improve resolution but can be challenging to handle and process.

Q: What determines morphology of metal powders from different methods?

A: Production factors like intensity of melt stream breakdown forces from gas jets or water impacts and subsequent cooling rates determine particle shapes. Faster cooling produces irregular, dendritic particles while slower solidification (spherical atomization) enables smooth rounded structures.

Q: Why is high purity important for metal powders in additive manufacturing?

A: Impurities can cause defects, porosity issues, alter alloy microstructures, reduce density, affect performance under loads and temperatures – negatively impacting mechanical properties. Target oxygen levels below 500 ppm and nitrogen levels below 100 ppm have become typical.

Q: How are metal powders handled safely during transportation and storage?

A: Reactive metal powders are passivated to create oxidized surfaces minimizing flammability risk. Powders are sealed in drums under inert gases like argon instead of air during shipment to prevent ignition. Storage containers must be properly grounded. Personnel wear specialized PPE while handling.

Q: What are common powder characterization methods?

A: Hall flowmetry, tap density tests, pycnometry, LOI testing, spectrographic analysis, metallography and particle size distribution using laser or sieve techniques are vital to quantifying behavior, building quality process control for metal powder production and assessing batch suitability for given applications.

få veta mer om 3D-utskriftsprocesser