Process med roterande elektrod i plasma

Den plasma rotating electrode process (PREP) is an advanced materials processing technology that utilizes plasma arcs and centrifugal forces to produce high performance materials. This innovative method combines the benefits of plasma arc melting and centrifugal casting, enabling the production of materials with superior properties compared to conventional processing routes.

Overview of the Plasma Rotating Electrode Process

The plasma rotating electrode process utilizes a rotating graphite electrode that is surrounded by a plasma arc. As the electrode rotates, feed-stock material is continuously melted by the plasma arc and flung off the tip of the electrode due to centrifugal forces. The molten material solidifies and is collected, producing a finished part or ingot.

Some of the key benefits of PREP technology include:

• Rapid melting and solidification rates, enabling refined microstructures
• Production of alloys difficult or impossible to make with conventional methods
• Ability to process reactive materials without contamination
• In-situ alloying and microstructure control
• Near net shape capabilities, minimizing machining

Compared to other plasma melting methods, the rotating electrode provides additional control over the thermal conditions during processing. This enables tailored solidification conditions to optimize the microstructure and properties of the finished material.

The plasma source provides extremely high temperature capabilities exceeding 10,000°C, enabling melting of any material. By adjusting the plasma power and other parameters, the thermal conditions can be precisely controlled. This allows for flexibility in designing alloys and processing conditions.

plasma rotating electrode process (PREP) technology for 3D printing applications:

Titanlegeringar

• Ti-6Al-4V, Ti-6Al-7Nb – Excellent strength-to-weight ratio and biocompatibility
• Very fine powders with controlled particle size distribution

Aluminiumlegeringar

• AlSi10Mg, AlSi12 – Low density with good strength and corrosion resistance
• Spherical morphology with high powder flowability

Superlegeringar av nickel

• Inconel 718, Inconel 625 – Outstanding high temperature properties
• Dense 3D printed parts with fine microstructure

Verktygsstål

• H13, P20, 420 stainless – High hardness, wear and corrosion resistance
• Capable of complex geometries for mold and die components

Refractory alloys

• Volfram, tantalum, molybdenum – Extremely high melting points
• High density powders suitable for radiation shielding

Kopparlegeringar

• CuCrZr, CuNi2SiCr – Excellent thermal and electrical conductivity
• Used for thermal management applications

Kobolt-krom-legeringar

• CoCrMo, CoCrW – Biocompatibility and high strength
• Low internal porosity with optimized parameters

The spherical powders produced via PREP enable high density 3D printed parts with excellent mechanical properties suitable for demanding applications in aerospace, medical, tooling, and more.

Equipment Used in Plasma Rotating Electrode Processing

The main components used in the plasma rotating electrode process include:

Plasma Torches

• Typically transferred arc torches delivering 10-100 kW of power
• Provides the high temperature plasma arc to melt the feed material
• Various plasma gases can be used – argon, nitrogen, hydrogen, helium

Roterande elektrod

• Usually made of graphite for high temperature capabilities
• Diameter and length depends on part size
• Rotates at speeds up to 3000 rpm
• Water-cooled to handle high thermal load

Mold

• Graphite or copper mold to shape the depositing material
• Water-cooled to rapidly solidify the molten material
• Centrifugal forces project the material to the mold walls

Power Supplies

• DC power supply to operate the plasma torch
• Can be operated in hot or cold cathode mode
• Currents ranging from 100-1000 A depending on plasma torch

Vakuumkammare

• Provides controlled atmosphere for plasma arc
• Vacuum or inert gas environment

Styrsystem

• Computerized control of plasma parameters
• Rotation speed
• Material feed rate
• Automated production

How the Plasma Rotating Electrode Process Works

The plasma rotating electrode process combines centrifugal casting and plasma arc melting into one integrated system. Here is an overview of how PREP works:

1. Feedstock insertion – The electrode is rotated at a high speed up to 3000 rpm. Feedstock material such as alloy powder is injected into the molten pool on the rotating electrode tip.
2. Smältande – The plasma arc from the surrounding plasma torch(es) melts the inserted feedstock and areas of the rotating electrode surface. Temperatures exceed 10,000°C ensuring rapid melting.
3. Molten material ejection – The centrifugal forces generated by the fast rotation cause the molten material to be flung off the electrode tip. This forms droplets that travel outwards.
4. Deposit formation – The ejected molten material impacts the water-cooled copper mold placed around the electrode. The droplets rapidly solidify to gradually form a deposit.
5. Tailored solidification – The high heat transfer rate provided by the mold enables controlled directional solidification. This allows optimizing the deposit structure.
6. Deposit collection – Once fully formed, the molded deposit is removed from the chamber. This may be an ingot, near net shape part, or other product morphology.
7. Automated operation – The PREP system is fully automated with computer control. It can run unattended to build up substantial quantities of material.
8. Parameter flexibility – Variables like plasma power, electrode rotation speed, and material feed rate can be adjusted to tailor the deposit characteristics.

Unique Capabilities of Plasma Rotating Electrode Processing

The plasma rotating electrode process provides some unique capabilities that differentiate it from other materials processing methods:

Rapid Solidification Rates

• Solidification rates exceeding 100,000°C/s are possible
• Enables formation of non-equilibrium phases and metastable structures
• Refines grain sizes down to the nanoscale

Net Shape Fabrication

• Deposits can be molded to near net shape reducing machining
• Complex part geometries can be directly produced
• Eliminates additional processing steps

Reactive Material Processing

• The plasma arc confinement allows reactive materials to be processed without contamination
• Highly reactive alloys like titanium aluminides can be produced

Thermal Control

• The rotating electrode provides additional control over the thermal conditions
• Enables tailored non-equilibrium cooling rates for microstructure control

In-Situ Alloying

• Alloying additions can be fed into the molten pool during processing
• Enables flexibility in designing and producing new alloys

Clean Processing Environment

• Vacuum chamber provides controlled atmosphere
• No crucibles are needed reducing potential contamination

Alloy Systems Processed with PREP

The plasma rotating electrode process is capable of producing a wide range of alloys systems including:

Titanium Aluminides

• Intermetallic alloys based on Ti and Al
• Excellent high temperature properties with low density
• Used for aerospace and automotive applications

Bulk Metallic Glasses

• Amorphous alloys with superior strength and hardness
• High cooling rates enable metallic glass formation
• Excellent engineering materials and coatings

Metal Matrix Composites

• Reinforced with carbides, oxides, or other particles
• Excellent specific strength and stiffness
• Used for aerospace, automotive, and semiconductor parts

Superlegeringar

• Nickel, iron, or cobalt based alloys with outstanding creep resistance
• Used for high temperature structures in turbines and engines

Verktygsstål

• Iron based alloys with high hardness and wear resistance
• Used for cutting tools, molds, dies, and other applications

Eldfasta metaller

• Ultra-high melting point metals like tungsten, molybdenum, niobium, tantalum
• Used for high temperature applications due to retention of strength

Microstructure and Property Enhancement

One of the main advantages of PREP is the ability to create advanced microstructures that impart enhanced properties. Some examples include:

Grain Refinement

• Extremely fine nanoscale grains can be produced
• Results in increased strength according to the Hall-Petch relationship

Extended Solid Solubility

• Solute trapping via rapid solidification expands solid solubility
• Alters alloying behavior allowing new compositions

Non-Equilibrium Phases

• Metastable phases can be retained at room temperature
• Provides precipitation strengthening and alters properties

Particle Reinforcement

• In-situ formation of nanoscale precipitates and particles
• Excellent strengtheners and refiners of grain size

Elimination of Segregation

• No chemical segregation due to rapid solidification
• Improves alloy homogeneity and eliminates defects

Improved Interfaces

• Rapid solidification enables interfaces free of contaminants
• Strengthens grain boundaries and interphase interfaces

Advantages of Plasma Rotating Electrode Processing

Some of the major advantages of PREP technology include:

• Mångsidighet – Capable of processing virtually all alloy systems
• Superior microstructures – Achieves significant grain refinement and microalloying
• Near net shape – Complex geometries can be directly fabricated
• Effektivitet – Automated hands-off operation with high productivity
• Kvalitet – Provides clean processing environment and eliminates defects
• Prestanda – Produces alloys with outstanding mechanical properties
• Novel alloys – Enables development of unique metastable compositions
• Cost effectiveness – Reduces raw materials waste and machining requirements

Compared to other processing methods, PREP enables new possibilities for alloy development and optimized materials performance.

Applications of Alloys Produced by PREP

The alloys fabricated using the plasma rotating electrode process have found usage in a diverse range of demanding applications:

Komponenter för flyg- och rymdindustrin

• Turbine blades, disks, casings from nickel and titanium alloys
• Requires high strength and creep resistance at elevated temperatures

Skärande verktyg

• Drill bits, end mills, saw blades using tool steel alloys
• Must withstand wear, impact, and heat during machining

Biomedicinska implantat

• Titanium or stainless steel alloys for orthopedic implants
• Excellent corrosion resistance and biocompatibility

Bildelar

• Engine components, drivetrain from aluminum, magnesium, and titanium alloys
• Lightweighting and performance under extreme conditions

Sportartiklar

• Golf clubs, bicycles, and high-end gear using advanced alloys
• High strength-to-weight ratio required

Elektronik

• Heat sinks cut from beryllium composites
• Requires thermal management capabilities

Kärntekniska tillämpningar

• Reinforced materials used in nuclear reactors
• Must maintain performance under radiation

Applications of Alloys Produced by PREP

Current Research on Plasma Rotating Electrode Processing

There are a number of areas of research being conducted to further advance PREP technology:

• Modeling of the complex plasma-material interactions
• Incorporation of novel and recycled materials as feedstock
• Multi-electrode configurations for large part production
• Hybrid PREP processes combined with additive manufacturing
• Development of new measurement diagnostics
• Joining dissimilar alloys to create metal matrix composites
• Exploring carbon nanotube reinforcement
• Economic and life cycle analyses of the process

Continued research will enable further process improvements, a wider range of alloys, and new applications. Government agencies and private companies are actively invested in advancing plasma rotating electrode processing.

Future Outlook for PREP Technology

The plasma rotating electrode process represents an innovative leap in materials processing technology. Ongoing developments and adoption by industry will enable next generation high performance alloys.

Several trends point to a bright future for PREP:

• Demand for specialized advanced alloys in diverse industries is increasing. PREP allows alloy compositions unachievable by conventional methods.
• Net shape and additive manufacturing is gaining wider utilization. PREP has near net shape capabilities surpassing other methods in alloy flexibility and quality.
• High throughput automated production is essential for competitiveness. PREP achieves hands-off automated operation with high productivity.
• Quality requirements for critical components are becoming more stringent. PREP offers a high precision, clean, and controlled processing environment.
• Alloys with enhanced engineered microstructures have exceptional performance. PREP unlocks metastable structures with unique properties.

With these drivers, PREP is poised to become an essential technology for next generation alloy production across numerous sectors. Continued rapid growth is expected in this exciting field.

Frequently Asked Questions About Plasma Rotating Electrode Processing:

Here are some common FAQs about the plasma rotating electrode process:

What are the main advantages of PREP technology?

Some key advantages are rapid solidification rates enabling advanced microstructures, near net shape fabrication, flexible alloying capabilities, clean processing environment, and automated production.

What materials can be processed by PREP?

Virtually any alloy system can be processed including titanium, aluminum, magnesium, nickel, cobalt, iron, tool steel, and refractory alloys. Nanocomposites and amorphous alloys are also possible.

How does PREP compare to other additive manufacturing methods?

PREP enables higher temperature alloys, finer grain structures, and avoids some issues with porosity and anisotropy. But PREP has limited geometries compared to powder bed fusion processes. The two are complementary.

What industries utilize alloys made by PREP?

Aerospace, biomedical, automotive, sporting goods, electronics, and nuclear industries take advantage of alloys from PREP. The technology is also used to make cutting tools.

What are some limitations of PREP technology?

The size of parts made is restricted by the electrode diameter. Complexity of part geometry is also limited compared to some other additive methods. Initial system costs are relatively high.

What new advancements are being made in PREP?

Some current research areas include multi-electrode systems, hybrid processes with additive manufacturing, advanced modeling, new in-situ diagnostics, and alloy development.

How does PREP improve the microstructure and properties of alloys?

Grain refinement, retained metastable phases, solute trapping, elimination of segregation, improved interfaces, and tailored solidification conditions result in enhanced alloy performance.

What expertise is required to operate a PREP system?

Specialized training is recommended to learn how to properly run PREP equipment. Knowledge of metallurgy and plasma physics is also beneficial to getting the most out of the technology.