Koppar C11000 pulver

Översikt

Koppar C11000 pulver, även känt som ETP (Electrolytic Tough Pitch) kopparpulver, är ett kopparpulver med hög renhet som produceras genom elektrolytiska processer. Det har en lägsta kopparhalt på 99,9% och är känt för sin kombination av renhet, enastående elektrisk och termisk ledningsförmåga, korrosionsbeständighet och bearbetbarhet.

Some key properties and characteristics of Copper C11000 powder include:

Copper C11000 Powder Properties

Copper C11000 powder owes its properties to its purity and production process which creates a porous structure with high surface area ideal for applications like brazing, welding, friction materials, additive manufacturing, and more.

The base metal properties combined with controllable particle size distribution, morphology, apparent density, and flow characteristics allow the powder to be tailored to specific uses across industries.

Tillämpningar och användningsområden

Copper C11000 powder’s unique combination of purity, conductivity, and workability make it suitable for the following applications:

Major Applications of Koppar C11000 pulver

The high purity, spherical morphology, and electrical conductivity of the powder enable excellent performance across this wide range of uses when blended with other metals, alloys, polymers, and base materials.

Specifikationer och kvaliteter

Copper C11000 powder is available in various particle size distributions categorized as granules and powders. Common size ranges include:

Copper C11000 Powder Sizes

Additionally, the powder can be segmented into classification grades which determine characteristics like purity, oxide levels, particle morphology, and more.

Popular standard grades of copper C11000 powder include:

• Grade 1 – High purity, low oxide
• Grade 2 – General purpose grade with good purity
• Grade 3 – Industrial grade with higher oxide levels

The grade chosen depends on application requirements and powder properties needed. Custom particle sizes and property optimization is also possible through toll processing.

Tillverkningsprocess

The predominant production method for Copper C11000 powder is through electrolytic reduction and refining of copper. The process involves:

1. Dissolution of copper anodes into electrolytes like copper sulfate
2. Electrolytic plating of 99.9% pure copper onto cathodes
3. Removal and processing of powder deposit through crushing, grinding, and sieving

Additional steps like deoxidation, annealing, screening, and blending are used to achieve target powder characteristics. High productivity, purity, and flexibility make electrolytic copper powder ideal for industry applications.

Alternative methods like atomization of molten copper can also produce Koppar C11000 pulver but are less common.

Leverantörer och prissättning

As a widely used industrial material, Copper C11000 powder is available from metal powder suppliers and specialty chemical distributors globally. Pricing varies based on:

• Partikelstorlek
• Packing format (bulk bags, drums, cans, etc.)
• Quantity and lot size
• Grade and purity levels
• Chemistry conformity certifications

Indicative pricing for Copper C11000 powder in US$ per kg:

Copper Powder Pricing

Custom toll processing services for special particle sizes, morphology, and property enhancement are also available at premiums to base pricing.

Jämförelse med alternativ

Key differences of Copper C11000 powder versus potential alternatives:

VS Brass and Bronze Powders

• Higher purity and conductivity
• Lower cost than many copper alloys
• Less prone to dezincification

VS Other Copper Powders

• More economical than CuOFE, CuFHC powders
• Higher conductivity than atomized/reduced copper powder
• Lower oxygen and impurities than Cu powder from scrap

VS Silver Powder

• Significantly lower cost
• Oxidation and migration resistance weaker than silver
• Thermal/electrical conductivity slightly below silver

VS Aluminum Powder

• Higher density and melting point
• Superior conductivity but more expensive
• Slower oxidation kinetics in reactive environments

So while other powder options exist, Copper C11000 offers the best balance of purity, performance, availability, and cost for most industrial uses.

Fördelar och begränsningar

Fördelar

• High purity and copper content
• Excellent conductivity and corrosion resistance
• Good workability and manufacturing flexibility
• Cost advantage over alloys/noble metals
• Readily available from variety of suppliers

Begränsningar

• Surface oxidation under heat or long storage
• Limited high temperature properties vs alloys
• Lower strength-to-weight ratio than aluminum
• Not biocompatible for medical devices
• Heavy weight increases shipping costs

Proper handling as well as protective coatings/atmospheres help mitigate limitations while retaining beneficial powder characteristics.

Standards and Compliance

Globally accepted standards for electrolytic copper powder’s chemistry specifications include:

• ASTM B602 – Standard Specification for Copper Powder and Flakes
• EN 13601 – Copper and copper alloys – Copper powder
• GB/T 467 – Copper and Copper Alloy Powder

These standards regulate critical elements like particle size distribution, apparent density, purity levels, loss on ignition limits, sieve residue percentages, and more.

Reputable copper powder suppliers test and certify to such standards while also supporting additional customer requirements as needed through internal QA/QC practices. Compliance certifications like ISO 9001 demonstrate systemic quality assurance across production and supply chains.

Vanliga frågor

Q: Does Koppar C11000 pulver oxidize rapidly in air?

A: Yes, copper powder can slowly oxidize during exposure to ambient conditions. The fine particle size and porous structure leads to growing oxide scale. Proper sealed storage with oxygen absorbers is recommended for preventing extensive oxidation over long durations.

Q: Can this powder be mixed with polymers like nylon?

A: Copper C11000 powder can be blended into various plastics through techniques like melt-mixing or twin screw extrusion compounding. Addition levels up to 70% by weight are possible for some engineered plastics, allowing EMI shielding or thermal conductivity benefits while retaining mechanical properties.

Q: What is the bulk density range of copper C11000 powder?

A: In loose poured form, apparent densities from around 2.5 – 4 g/cm3 are common. Under compaction/vibration the tap density can go up to 5 – 5.5 g/cm3. Particle size distribution and morphology governs density ranges. Fine powders tend to have lower densities.

Q: Does welding with Copper C11000 powder increase joint strength?

A: Yes, adding pure copper powder to steel/aluminum welds through processes like cold metal transfer welding and laser cladding improves mechanical properties. This is achieved by bonding base metals with the high purity copper particles through dissolution and re-deposition.

få veta mer om 3D-utskriftsprocesser